FALCON helps our customers with efficient fuel management for preventing fuel theft, fuel usage and more. Know how fuel management system works.
Fuel is a valuable asset to mankind. Its usage has only increased since petroleum fuel was found. Any fuel whether it is petrol or CNG (Compressed Natural Gas) every fleet needs them in large quantities for keeping them longer on the roads.
Now-a-days the biggest challenge of any fleet manager is fuel management. This is because of the points listed below:
These problems not only affect the large industries but also have a huge impact on small transport companies.
What do you need?
To overcome this problem, you need to get an efficient fuel management system. It will help you track the fuel usage along with real-time tracking.
Now, in the competitive market when so many options are available. It becomes difficult for you to decide which system you should use.
So, today we will discuss how we are different from others.
The main highlight of FALCON’s fuel management system is its compatibility with any type of fuel sensors and devices. This means you won’t have to depend on our trackers.
Sensors are used to get accurate data, but many times, sensors can be expensive. So we have two options for data gathering which are rod and fleet average. You can place the gauge rod in the fuel tank, then add full, half and empty tank reading in the system. This will help you to get real-time data of fuel. User can also configure the system with fleet average for gathering accurate fuel data.
Important highlights are:
How to configure the Fuel management system?
Monitoring fuel is an important task for all fleet managers. To get accurate details of fuel, you will have to configure the system according to your requirement.
Fuel configuration is a tough job but with us, it’s a simple and interesting task. You simply need to calibrate by adding data as required.
Our fuel management system enables to get the data in any fuel unit. We provide data in the form of Gallon, Percentage, Voltage and Litre. You won’t have to convert the system data into the unit you require. As the system will provide accurate data in the fuel unit as you need.
The fuel tanks are large and flat containers. So, when a car accelerates or decelerates, climb or descend or parking on a hill and driving on bumpers, will move fuel irregularly from one end to another in the tank. This will cause fluctuation. These fluctuations make fuel consumption monitoring difficult. To overcome the problem, our system eliminates unwanted fluctuation level and gathers accurate data.
Normally fuel management system records data only when a fleet is in motion. But it’s important to understand that fuel theft occurs when fleet is not in motion and fuel leakage can also occur. By understanding this we give you the opportunity to get fuel data for fleet is not in motion.
Fuel calibration is a manual process in many systems available in the market. But we have two calibration methods which are manual and automatic. Both of these methods are simple and easy to use.
Thus, the configuration of our system enables you to capture accurate fuel level changes along with efficiently understands fuel theft.
What is the speciality of our analytical reports?
For us, the report is not about presenting all the collected data. We collect all the data, then sort the important ones and provide a report in tabular for simple understanding. Moreover, we provide two useful reports which are Consumption and Fill-Drain which analyses all the fuel data and keeps track of fuel status.
This report as its name suggests is used to monitor fuel consumption during a fleet trip. The report gives consumption recorded in the sensor, fleet mileage, duration and distance along with fleet distance. These data can help you to accurately understand when was more fuel consumed by the fleet.
This report helps in identifying fuel filling and drain in any fleet. It enables you to understand when and where fuel drain or fuel filling occurred. So, you won’t miss any important data. Along with this, you will also get to know fleet running and idling time to understand fuel wastage and consumption.
What is new in our charts?
Charts, as we all understand, are the graphical representation of the actual data collected. Our system also does the same, it collects all fuel data from the report and other sources and then presents them in a graphical form. Here you will be able to see three charts which are fuel consumption, fuel level and fuel refill vs drain. All these charts enable to understand fuel level changes, fuel consumption and other fuel activities with accurate data.
How do we help in efficient expense calculation?
Expense calculation is a big problem for all industry. We have a fuel expense management feature that not only keeps track of fuel expense but also enable to compare previous fuel expenses.
The expense management with simple expense data entry keeps track of every small and big expense.
Along with this, it also gives the option to add or select authorised fuel station for your fleet. This can help you to catch unauthorised fuel filling by the driver.
Which alerts are there in our system?
The alert helps you to know about all the changes in the fuel tank. This helps you to prevent fuel theft, leakage and catch false fuel filling. The system provides alerts like:
You won’t miss any fuel changes with these alerts.
We hope this was useful for all the new and experienced fleet managers. Use fuel with care and prevent fuel from extinction. Be connected with us for more such features and other arriving technology.
© Copyright Falcon Trackers 2020 . All Rights Reserved.
Maintained By Technixserv IT Solutions